What's in the box-DB7 Camera

LaView DB7 2K Wire-Free Doorbell Camera

LaView DB7 doorbell camera system provides one DB7 doorbell camera, and one M2 Base Station.

With prevailing 2K resolution of a higher image clarity, LaView DB7 doorbell camera allows you to view every detail of your front door in crystal clear, and to record footage with long life battery life of 160 days maximum.

The M2 Base Station stores all your recordings from DB7 doorbell camera, with a local SD card installed, and it also acts as a bridge between the camera and your router to double the Wi-Fi range, to increase camera connection speed by 120%.

Moreover, M2 base station is actually a ring chime and will produce a ding-dong sound when someone presses the doorbell.

Now let's open the box.

The package contains M2 Base Station, DB7 doorbell camera, Mounting Screws, Wall plugs and Bracket for camera, Charging Cable for camera, Drilling Template and the User Manual.

Let's check this DB7 doorbell camera.

The Lens is in the front, it is served by a 3MP image sensor for shooting videos.

P I R Sensor downside, detects infrared light feedback from objects and detects motions.

The Microphone allows you to talk over the camera with the APP and gather sound for videos.

The LED Indicator shows either camera network status or error prompts.

Let's turn up the rubber lid with a little power icon and check the Power Button as well as the Charging Port.

Please always make sure the rubber lid is sealed after charging, for weatherproof function.

The speaker at the bottom supports both tamper alarm and two-way audio function.

Now let's check the base station.

The LED Indicator is in the front.

The speaker is right below and it plays guide beeping along the setup process, and it also acts as a doorbell ring chime.

Plug M2 Base Station into the wall outlet to power it on.

The antennas on both sides help enhance the network connection.

The memory card slot supports SD card with capacity up to 128GB, and saves your footage from all cameras connected to the base station.

Reset your M2 Base Station by holding down the power button.